大佬们咨询一下软路由2.5G网速问题

共计 2669 个字符，预计需要花费 7 分钟才能阅读完成。

我是 N5105 上面安装了 ikuai，和 nas，nas 里面安装了 iperf3，在 ikuai 里面进行 iperf3 测试，只能跑到千兆，这种测试跑不到 2.5G 吗？必须要超频以后才可以吗？请大佬们给看一下
Connecting to host 192.168.88.1, port 5201
[6] local 192.168.88.88 port 41078 connected to 192.168.88.1 port 5201
[ID] Interval Transfer Bitrate RetrCwnd
[6] 0.00-1.09 sec90.2 MBytes 692 Mbits/sec1887 472 KBytes
[6] 1.09-2.00 sec81.3 MBytes 751 Mbits/sec2891 735 KBytes
[6] 2.00-3.00 sec 135 MBytes1.13 Gbits/sec6278 495 KBytes
[6] 3.00-4.00 sec 148 MBytes1.24 Gbits/sec5965 622 KBytes
[6] 4.00-5.00 sec 109 MBytes 913 Mbits/sec3286 419 KBytes
[6] 5.00-6.00 sec 128 MBytes1.07 Gbits/sec2556 509 KBytes
[6] 6.00-7.15 sec 131 MBytes 957 Mbits/sec2515 1.08 MBytes
[6] 7.15-8.00 sec35.0 MBytes 346 Mbits/sec1387 495 KBytes
[6] 8.00-9.00 sec 106 MBytes 889 Mbits/sec6413 597 KBytes
[6] 9.00-10.00sec 128 MBytes1.07 Gbits/sec6154 503 KBytes
– – – – – – – – – – – – – – – – – – – – – – – – –
[ID] Interval Transfer Bitrate Retr
[6] 0.00-10.00sec1.06 GBytes 914 Mbits/sec39332 sender
[6] 0.00-10.01sec1.06 GBytes 912 Mbits/sec receiver
iperf Done.
复制代码

5105 出了名的网速不稳定
认命吧

我看到软路由里面的 cpu 在测速的时候跑满了 …. 网速上不去，不知是不是要超频一下

不是 CPU 的问题，是网卡问题，认命吧
我早就 5105 换回 4125 用，就是各种折腾还是不能解决

再测又提高了一点，是真不稳定，看来真如老哥所说是网卡不稳定。。。
Connecting to host 192.168.88.1, port 5201
[6] local 192.168.88.88 port 53436 connected to 192.168.88.1 port 5201
[ID] Interval Transfer Bitrate RetrCwnd
[6] 0.00-1.00 sec 140 MBytes1.17 Gbits/sec10788 574 KBytes
[6] 1.00-2.00 sec 120 MBytes1.01 Gbits/sec7286 713 KBytes
[6] 2.00-3.00 sec 159 MBytes1.33 Gbits/sec10922 485 KBytes
[6] 3.00-4.00 sec 159 MBytes1.33 Gbits/sec3859 699 KBytes
[6] 4.00-5.00 sec 140 MBytes1.17 Gbits/sec4792 255 KBytes
[6] 5.00-6.00 sec 124 MBytes1.04 Gbits/sec1803 515 KBytes
[6] 6.00-7.00 sec 121 MBytes1.02 Gbits/sec3548 631 KBytes
[6] 7.00-8.00 sec 138 MBytes1.15 Gbits/sec3788 752 KBytes
[6] 8.00-9.00 sec 136 MBytes1.14 Gbits/sec3713 778 KBytes
[6] 9.00-10.00sec 141 MBytes1.18 Gbits/sec4053 469 KBytes
[6]10.00-11.00sec 164 MBytes1.37 Gbits/sec5640 882 KBytes
[6]11.00-12.00sec 158 MBytes1.32 Gbits/sec4010 549 KBytes
[6]12.00-13.00sec 173 MBytes1.45 Gbits/sec6599 543 KBytes
[6]13.00-14.00sec 135 MBytes1.13 Gbits/sec3699 543 KBytes
[6]14.00-15.00sec 163 MBytes1.37 Gbits/sec3509 546 KBytes
[6]15.00-16.00sec 171 MBytes1.43 Gbits/sec2158 642 KBytes
[6]16.00-17.00sec 169 MBytes1.42 Gbits/sec2367 1021 KBytes
[6]17.00-18.00sec 174 MBytes1.46 Gbits/sec3142 444 KBytes
[6]18.00-19.00sec 163 MBytes1.36 Gbits/sec1992 126 KBytes
[6]19.00-20.00sec 140 MBytes1.17 Gbits/sec2183 509 KBytes
– – – – – – – – – – – – – – – – – – – – – – – – –
[ID] Interval Transfer Bitrate Retr
[6] 0.00-20.00sec2.92 GBytes1.25 Gbits/sec89851 sender
[6] 0.00-20.02sec2.91 GBytes1.25 Gbits/sec receiver
iperf Done.母机用的什么系统，ESXi?

exsi 我也关了 C -STARTES 结果反而比上面更慢了……