共计 1539 个字符，预计需要花费 4 分钟才能阅读完成。
用的是光圈美国的 4876, 说是美国的 VPS 自带 IPV6 但是面板不显示.
我用 "ip a" 显示如下信息
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
link/ether 00:0a:bc:1e:7a:79 brd ff:ff:ff:ff:ff:ff
inet 103.152.113.57/24 brd 103.152.113.255 scope global eth0
valid_lft forever preferred_lft forever
inet6 2602:feda:30:ae86:20a:bcff:fe1e:7a79/64 scope global dynamic mngtmpaddr
valid_lft 86376sec preferred_lft 14376sec
inet6 fe80::20a:bcff:fe1e:7a79/64 scope link
valid_lft forever preferred_lft forever 复制代码
使用 https://ping6.ping.pe/ 尝试 ping 了下面的地址都不行哈
2602:feda:30:ae86:20a:bcff:fe1e:7a79:1
fe80::20a:bcff:fe1e:7a79:1
正确可以使用的 IPV6 地址是哪个哈?
感谢
上一篇：loc 不用挂梯子了
下一篇：原生安卓系统是真的流畅
2602 开头的。fe80 是内网地址请 ping 2602:feda:30:ae86:20a:bcff:fe1e:7a79ping6 2001:4860:4860::8888
Ping 谷歌的 IPv6 地址，能通说明就有 IPv6。请 ping 2602:feda:30:ae86:20a:bcff:fe1e:7a79 感谢楼上的大佬们
还有一个问题, 我本地尝试了是可以 ping 通的
Pinging 2602:feda:30:ae86:20a:bcff:fe1e:7a79 with 32 bytes of data:
Reply from 2602:feda:30:ae86:20a:bcff:fe1e:7a79: time=164ms
Reply from 2602:feda:30:ae86:20a:bcff:fe1e:7a79: time=161ms
Reply from 2602:feda:30:ae86:20a:bcff:fe1e:7a79: time=162ms
Reply from 2602:feda:30:ae86:20a:bcff:fe1e:7a79: time=159ms
Ping statistics for 2602:feda:30:ae86:20a:bcff:fe1e:7a79:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 159ms, Maximum = 164ms, Average = 161ms 复制代码
但是为什么 SSH 不行啊, 其他的几台 IPV6 都是可以的哈~~
