共计 1299 个字符，预计需要花费 4 分钟才能阅读完成。
内容最后由 afkool 于 2023-5-26 11:33 编辑 鉴于最近本地挂代理被请去喝茶的朋友越来越多，就把自己的独服给朋友开了两台 3389 远程挂 Telegram 聊天、刷 pt 用，因为太卡，又买了个 9929 线路中转查了好几个，但很多编辑 nftables.conf 的教程我照抄了老不起作用。。后来发现了这个还挺好使，后期加端口也简单。大佬轻喷，菜鸡拿去用。在 9929 上新建配置。/etc/nftables/example.nft 复制代码然后在 /etc/nftables.conf 复制代码文件里最底下加一行 include "/etc/nftables/example.nft" 复制代码 /etc/nftables/example.nft 的文件如下图所示 define localIP = 本地 IP（9929、CN2）define remoteIP = 需要加速的 IP（拉跨线路）define remotePort = 远程端口 define localPort = 本地端口 define remotePort2 = 远程端口 2define localPort2 = 远程端口 2# 我远程和本地用一个端口。免得混淆。网上说用不一样的会有未知 Bug.# Flush the rule set#flush rulesetadd table ip natadd chain nat PREROUTING {type nat hook prerouting priority -100 ;}add chain nat POSTROUTING {type nat hook postrouting priority 100 ;}add rule ip nat PREROUTING tcp dport $localPort counter dnat to $remoteIP:$remotePortadd rule ip nat PREROUTING udp dport $localPort counter dnat to $remoteIP:$remotePortadd rule ip nat POSTROUTING ip daddr $remoteIP tcp dport $remotePort counter snat to $localIPadd rule ip nat POSTROUTING ip daddr $remoteIP udp dport $remotePort counter snat to $localIPadd rule ip nat PREROUTING tcp dport $localPort2 counter dnat to $remoteIP:$remotePort2add rule ip nat PREROUTING udp dport $localPort2 counter dnat to $remoteIP:$remotePort2add rule ip nat POSTROUTING ip daddr $remoteIP tcp dport $remotePort2 counter snat to $localIPadd rule ip nat POSTROUTING ip daddr $remoteIP udp dport $remotePort2 counter snat to $localIP 复制代码 hcyme 2023-05-26 11:41 2 菜鸡收藏
